Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Equipment


Home » Equipment » All Products

 Checkout
Gun,  EZE Sprayer
Gun, EZE Sprayer
 
An affordable and easy to use siphon type spray gun.
Price: $28.95

Gun,  Paasche Spray Gun #62
Gun, Paasche Spray Gun #62
 
This sprayer covers the range between the fine airbrush and the spray gun coverage.
Price: $49.00

Gun,  SG 212 Spray Gun
Gun, SG 212 Spray Gun
 
Internal mix, pressure feed for heavy materials. Adjustable fluid control. Includes internal and external mix fan nozzles. Bleeder type gun. Operates on air pressures from 20 to 45 PSI. Requires 1/10 H.P. compressor or higher. Basic spray gun for a variety of materials.
Price: $93.00

Gun, Vapor Spray Gun
Gun, Vapor Spray Gun
 
2.3 mm needle tool and nozzle set up for high viscosity materials. Operating pressure: 15-50 psi, 600 cc Plastic Paint Cup, Air Inlet: 1/4", Air Consumption: 4.5-7.5 cfm.
Price: $65.00

Jiffy Mixer  ES  (requires 3/8" drill motor)
Jiffy Mixer ES (requires 3/8" drill motor)
 
20.5" x 3.25" with a 3/8" shaft. Mixes 2-5 gallons. Up to 1,000 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $45.35

Jiffy Mixer  HD  (requires 3/4" drill motor)
Jiffy Mixer HD (requires 3/4" drill motor)
 
40" x 9.75" with a 3/4" shaft. Mixes 75-100 gallons. Up to 250 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $224.95

Jiffy Mixer  HS-1
Jiffy Mixer HS-1
 
10" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $12.20

Jiffy Mixer  HS-2
Jiffy Mixer HS-2
 
14.75" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $14.65

Jiffy Mixer  HS-3
Jiffy Mixer HS-3
 
30" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $17.65

Jiffy Mixer  LM
Jiffy Mixer LM
 
10" x 1.25" with a 1/4" shaft. Mixes 1 pint. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $11.40

Jiffy Mixer  PS-1  (requires 1/2" drill motor)
Jiffy Mixer PS-1 (requires 1/2" drill motor)
 
20.5" x 4.75" with a 1/2" shaft. Mixes 5-10 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $49.95

Jiffy Mixer  PS-2  (requires 1/2" drill motor)
Jiffy Mixer PS-2 (requires 1/2" drill motor)
 
40" x 5" with a 1/2" shaft. Mixes 10-50 gallons. Up to 450 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $61.45

Kemper Klay Gun K45
Kemper Klay Gun K45
 
This tool is used to force soft clay through various shaped openings in an assortment of inter-changeable discs. The extruded clay shapes can be used for an almost limitless number of decorative effects such as hair, grass, flower stamens, rope. logs, bricks, vines and stems. The Klay Gun is furnished with a set of 19 discs that are formed to allow flush cutoff of the extruded clay. It is constructed of sturdy die cast zinc alloy and is about 4" long. Net Wt. is 1 lb.
Price: $17.99

 
Kemper Klay Gun K45 Replacement Disks
 
Net Wt. is .25 lbs.
Price: $4.29

 
Kemper Klay Gun K45 Replacement Screens
 
Net Wt. is .25 lbs.
Price: $3.65

« | ...10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20... | »