Equipment

Blocks off 3 openings on 4-cavity die plate. Ship Wt is 1 lb.

Expansion box, die retainer ring, hex wrench, three piece spacer board and all hardware. The Expansion Box allows the user to produce larger extrusions from their North Star 4" Standaed Extruder. The bottom portion of the detachable box fits North Star's selection of 6 inch Dies. Ship Wt is 8 lbs.

4.5" square, round, and hex hollows and center brace. Square shown. For use with the Big Blue Extruder and the Expansion Box Kit for the Standard Extruders. Ship Wt is 5 lbs.

3.5" square, round, and hex hollows and center brace. Round shown. For use with the Big Blue Extruder and the Expansion Box Kit for the Standard extruders. Ship Wt is 5 lbs.

18" x 24" - 21 oz. - 2 pcs.

2.5" x 18" rollers, 2 TableToppers, crank, and canvas.

5 Shelves and 8 brackets included. Full 6 inch diameter American-made industrial ball bearing casters are rated at 300 pounds each (or 1,200 pounds) and roll easily, even over rough or contaminated floors. All four casters swivel for easy maneuvering and two have foot-operated parking brakes. Shelves are supported at each end by brackets of a unique design that simply drop into square holes spaced every 2 inches along the corner uprights. The spacing between shelves and the number of shelves is instantly adjustable without tools. All shelves except the bottom one, which rides directly on the base, can be placed at any level so there is never wasted space and conveniently slide in and out. For low pieces, such as tiles, the truck can hold as many as 22 shelves.

Full 6 inch diameter American-made industrial ball bearing casters are rated at 300 pounds each (or 1,200 pounds) and roll easily, even over rough or contaminated floors. All four casters swivel for easy maneuvering and two have foot-operated parking brakes. Shelves are supported at each end by brackets of a unique design that simply drop into square holes spaced every 2 inches along the corner uprights. The spacing between shelves and the number of shelves is instantly adjustable without tools. All shelves except the bottom one, which rides directly on the base, can be placed at any level so there is never wasted space and conveniently slide in and out. For low pieces, such as tiles, the truck can hold as many as 22 shelves.

2" square, round, and hex hollows and center brace. Hex shown. For use with the Big Blue Extruder and the Expansion Box Kit for the Standard extruders. Ship Wt. is 5 lbs.

24" x 36" - 21 oz. - 2 pcs.

30" x 36" - 21 oz. - 2 pcs.

1 SHELF. These very strong worktables can support 600 pounds on each surface for a total of 1,200 pounds. They can be ordered with or without the bottom shelf; they can be ordered with one or two End Wings or, as shown here, without End Wings. End Wings, or "extensions" just fold down against the legs when not in use; they can be smooth or have an opening to hold a five-gallon plastic bucket. Frame is 16-gauge American steel with baked-on powder coat finish far tougher than any paint. Top and shelf made of 3/4" MDF (no formaldehyde) with a high-pressure melamine overlay. Overall dimensions as shown: 50" long, 28" wide, 36" high.

2 SHELVES. These very strong worktables can support 600 pounds on each surface for a total of 1,200 pounds. They can be ordered with or without the bottom shelf; they can be ordered with one or two End Wings or, as shown here, without End Wings. End Wings, or "extensions" just fold down against the legs when not in use; they can be smooth or have an opening to hold a five-gallon plastic bucket. Frame is 16-gauge American steel with baked-on powder coat finish far tougher than any paint. Top and shelf made of 3/4" MDF (no formaldehyde) with a high-pressure melamine overlay. Overall dimensions as shown: 50" long, 28" wide, 36" high.

24" x 72" - 21 oz. - 2 pcs.

30" x 72" - 21 oz. - 2 pcs.