Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Glaze Mixing, Slip Mixing & Casting


Home » Equipment » Glaze Mixing, Slip Mixing & Casting » All Products

 Checkout
Jiffy Mixer  ES  (requires 3/8" drill motor)
Jiffy Mixer ES (requires 3/8" drill motor)
 
20.5" x 3.25" with a 3/8" shaft. Mixes 2-5 gallons. Up to 1,000 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $58.75

Jiffy Mixer  HD  (requires 3/4" drill motor)
Jiffy Mixer HD (requires 3/4" drill motor)
 
40" x 9.75" with a 3/4" shaft. Mixes 75-100 gallons. Up to 250 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $349.95

Jiffy Mixer  HS-1
Jiffy Mixer HS-1
 
10" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $24.50

Jiffy Mixer  HS-2
Jiffy Mixer HS-2
 
14.75" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $25.32

Jiffy Mixer  HS-3
Jiffy Mixer HS-3
 
30" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $28.55

Jiffy Mixer  LM
Jiffy Mixer LM
 
10" x 1.25" with a 1/4" shaft. Mixes 1 pint. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $22.15

Jiffy Mixer  PS-1  (requires 1/2" drill motor)
Jiffy Mixer PS-1 (requires 1/2" drill motor)
 
20.5" x 4.75" with a 1/2" shaft. Mixes 5-10 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $66.10

Jiffy Mixer  PS-2  (requires 1/2" drill motor)
Jiffy Mixer PS-2 (requires 1/2" drill motor)
 
40" x 5" with a 1/2" shaft. Mixes 10-50 gallons. Up to 450 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $80.25

Lehman Casting Table with Table Legs   STJ-L

Details 

This molded acrylic table has 12 removable dowels and a 2" center drain with a shutoff. The steel table can hold 2,000 lbs. 26" x 42".
Price: Price: Please call

Lehman Mity Mite Elite Mixer
Lehman Mity Mite Elite Mixer
 
The Mity Mite Mixer (shown on the left) is the most efficient small mixer available. It's perfect for regular slip, porcelain, stoneware and makes for fast and easy reclaiming of wet trimmings from molds. In fact, it will mix glaze and about anything else that can be classified as a heavy slurry liquid. It has a capacity of 10 gallons. Lid and outlet spigot included. Polyethylene tank carries a 5 year warranty, all other parts have one year warranty. Complete with cord, switch and mixing instructions.
Price: Price: Please call

Lehman RM-30
Lehman RM-30
 
THe RM-30 has a unique reverse pumping action which allows for both the filling and draining of molds with just a flick of a switch. The utility nozzle easily controls the slip flow from a trickle to a full 5 GPM. The drain tube (attaches to the nozzle) is especially designed to draw in from the sides and will not harm the greenware. 24" diameter x 45" high overall. 32" high to top of tank.
Price: Price: Please call

Lehman Slip Mixer  30-B

Details 

Excellent for either making slip or reclaiming trimmings. Round polyethylene tank with direct-drive, top mounted mixer. Has a removable plexi-glass cover and a 2" side drain spigot. A steel base is optional, or you can make one to your own requirements. 1/2 h.p. motor. Requires some minor assembly, and mixing and reclaiming instructions are included. The 30-B has a diameter of 19", tank height of 30", 41" tall overall.
Price: Price: Please call

 
Lehman Slip Mixer 30-B Base
 
Base is optional and you must specify 30-B.
Price: Price: Please call

Lehman Slip Mixer  BR-6
Lehman Slip Mixer BR-6
 
The BR-6 (shown on the right) has the same great mechanical features as the Mity Mite, except it is designed to fit on a 6 gallon bucket. The motor mount / top cover of the BR6 is clear lexan and it both seals the tank and allows you to see inside. The BR-6 has a convenient handle so the mixer can be moved from bucket to bucket. A 6 gallon bucket is provided with the BR-6.
Price: Price: Please call

Lehman Slip Mixer  COM

Details 

Shown on left. The COM mixer features a C-clamp mount with adjustable angle settings. This allows the unit to be installed in a variety of tanks. It has a 31" long stainless steel shaft with two 4" mixing props. The 1/2 h.p. motor has an 8" cord and in-line switch.
Price: Price: Please call

« Previous | 1 | 2 | »