Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Skutt Kiln Accessories


Home » Kilns & Firing Accessories » Skutt Electric Kilns » Skutt Kiln Accessories

 Checkout
Kiln  Sitter Hex Wrench - Part # KS-116W

Details 

Used to tighten the screw that holds the sensing rod "claw".
Price: $2.00

Kiln Sitter Firing Gauge

Details 

Used to calibrate the proper positioning of the sensing rod in a LT-3K Kiln Sitter.
Price: $5.00

Kiln Sitter LT-3K Tube Assembly - 70- SHORT

Details 

Kiln Sitter LT-3K Tube Assembly - 70- Short Kiln Sitter Tube Assembly Old Style. Length from outside edge of metal bracket to tip of ceramic tube is 6 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $50.00

Kiln Sitter LT-3K Tube Assembly - 70A-LONG

Details 

Kiln Sitter Tube Assembly for 2.5" brick walls. Length from outside edge of metal bracket to tip of ceramic tube is 7 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $50.00

Kiln Sitter LT-3K Tube Assembly - 70B-XLONG

Details 

Kiln Sitter Tube Assembly for 3" brick walls. Length from outside edge of metal bracket to tip of ceramic tube is 7.5 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $50.00

Skutt     Envirovent 2

Details 

The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System, the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Ship wt. is 17 lbs.
Price: $515.00

Skutt    EnviroLink
Skutt EnviroLink
 
The EnviroLink was developed by engineers at Skutt to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/Hold Program or during preset times of a ConeFire or Glass Fire Mode program. Ship wt. is 2 lbs.
Price: $128.00

 
Skutt Dual Intake Kit
 
The Dual Intake Kit allows you to vent 2 kilns up to 12 cubic feet each, or one kiln between 12 and 24 cubic feet, with one EnviroVent 2 Motor.
Price: $160.00

 
Skutt Extension Kit
 
8' x 3" ducting used to extend original duct.
Price: $32.00

Skutt   Type K Thermocouple - Skutt part #1515

Details 

Element only. Does not include porcelain block or lead wires. Instructions included. 6" in length. Ship wt. is .25 lbs.
Price: $15.00

Skutt  Analog Pyrometer - Type K
Skutt Analog Pyrometer - Type K
 
If you are ordering a KilnSitter kiln you may want to equip it with a Skutt Analog Pyrometer. A pyrometer will let you know what the temperature of the kiln chamber is throughout the entire firing. This is especially helpful to know when you are firing glass, heat treating metal or troubleshooting your kiln. The pyrometer comes complete with a MI Cable Type K thermocouple and all the mounting hardware needed. 0-2500F type K thermocouple with wall mounted meter. Ship wt. is 2 lbs.
Price: $150.00

Skutt  Dual Input Digital Pyrometer - Type K
Skutt Dual Input Digital Pyrometer - Type K
 
This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf. Since it is Dual Input, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy. Ship wt. is 1 lb.
Price: $155.00

Skutt  MI Cable - Skutt part #1594
Skutt MI Cable - Skutt part #1594
 
Thermocouple for Skutt Glass Master Kilns.
Price: $63.00

Skutt Easy View
Skutt Easy View
 
The Easy View is a new optional feature that makes it easier to see and program your controller by angling the touchpad up. It can be added to any KilnMaster kiln in minutes without having to remove any wires from the controller. Ship wt. is 4 lbs.
Price: $35.00

Skutt KM-1 Wall Mounted Controller -  50 amp / single phase

Details 

Now, the many thousands of Skutt kiln owners can add KilnMaster electronic control to their Skutt manual kilns in a matter of minutes, and there is no sacrifice of traditional quality or performance. The Skutt KilnMaster may also be used with other brand kilns. Easy to install. You need only to drill a small hole in through your kiln's firebrick for the KilnMaster thermocouple (the stainless steel jacket is already punched on Skutt kilns) and plug your kiln into the unit. Wall mounted convenience. The KilnMaster is easy to wall mount at eye level near your kiln, so you can monitor a firing without bending or stooping. The color-impregnated unbreakable housing and sealed touch pad faceplate are designed to keep clay and dust out. They are easy to wipe clean with a damp cloth.
Price: $930.00

« Previous | 1 | 2 | »