Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Skutt Electric Kilns


Home » Kilns & Firing Accessories » Skutt Electric Kilns » All Products

 Checkout
Skutt    EnviroLink
Skutt EnviroLink
 
The EnviroLink was developed by engineers at Skutt to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/Hold Program or during preset times of a ConeFire or Glass Fire Mode program. Ship wt. is 2 lbs.
Price: $125.00

 
Skutt Dual Intake Kit
 
The Dual Intake Kit allows you to vent 2 kilns up to 12 cubic feet each, or one kiln between 12 and 24 cubic feet, with one EnviroVent 2 Motor.
Price: $160.00

 
Skutt Extension Kit
 
8' x 3" ducting used to extend original duct.
Price: $32.00

Skutt   Type K Thermocouple - Skutt part #1515

Details 

Element only. Does not include porcelain block or lead wires. Instructions included. 6" in length. Ship wt. is .25 lbs.
Price: $15.00

Skutt  Analog Pyrometer - Type K
Skutt Analog Pyrometer - Type K
 
If you are ordering a KilnSitter kiln you may want to equip it with a Skutt Analog Pyrometer. A pyrometer will let you know what the temperature of the kiln chamber is throughout the entire firing. This is especially helpful to know when you are firing glass, heat treating metal or troubleshooting your kiln. The pyrometer comes complete with a MI Cable Type K thermocouple and all the mounting hardware needed. 0-2500F type K thermocouple with wall mounted meter. Ship wt. is 2 lbs.
Price: $150.00

Skutt  Bead Kiln with Bead Door GM10F - single phase / 115 volts

Details 

Electrical Requirements: Single Phase, 115 Volts, 15 Amps, 1725 Watts, Copper Wire Size: 12, Breaker Size: 20, NEMA Receptacle Configuration: 5-15, .45 cubic feet of 1800F power. Inside Chamber Dimensions: 10" x 9" x 9" deep. Uses a 8" x 8" shelf. Shipping Weight is 89 lbs.
Price: $1135.00

Skutt  Dual Input Digital Pyrometer - Type K
Skutt Dual Input Digital Pyrometer - Type K
 
This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf. Since it is Dual Input, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy. Ship wt. is 1 lb.
Price: $130.00

Skutt  Firebox  8 - single phase / 115 volts

Details 

Electrical Requirements: Single Phase, 115 Volts, 15 Amps, 1725 Watts, Copper Wire Size: 12, Breaker Size: 20, NEMA Receptacle Configuration: 5-15, .17 cubic feet of 2000F power. Inside Chamber Dimensions: 10" x 9" x 4.25" deep. Uses a 8" x 8" shelf. Shipping Weight is 42 lbs.
Price: $795.00

Skutt  Firebox 14 Studio Kiln - single phase / 115 volts

Details 

Electrical Requirements: Single Phase, 115 Volts, 15 Amps, 1725 Watts, Copper Wire Size: 12, Breaker Size: 20, NEMA Receptacle Configuration: 5-15, .8 cubic feet of 1700F power. Inside Chamber Dimensions: 14.5" x 14.5" x 6.5" deep. Uses a 12" x 12" shelf. Shipping Weight is 110 lbs.
Price: $1085.00

Skutt  KilnLink Box - Part #4603

Details 

WHAT IS KILNLINK? KilnLink is a cloud based Kiln Monitoring System that allows you to check the status of your kiln from anywhere you have access to the internet. It does not allow you to control the kiln remotely. HOW DOES IT WORK? KilnLink connects your kiln to the internet and feeds information from each firing in real time to the KilnLink Database. Authorized users just log on to their account using a computer or smart phone connected to the internet. You can even set it up to send you Email or Text alerts. WHAT KIND OF INFORMATION CAN I OBTAIN? Each kiln will need 1 LinkBoard and have access to a KilnLink Box. You can run up to 4 LinkBoards on one KilnLink Box. The LinkBoard will be installed in the factory when ordered with a kiln. Each LinkBoard is priced to include 5 years of Monitoring Service and Data Storage. For detailed information, go to: http://www.skutt.com/kilnlink/index.php
Price: $400.00

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »