Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Kilns & Firing Accessories


Home » Kilns & Firing Accessories » All Products

 Checkout
 

Details 

Temperature Range is 0-2500F. 4 burners. 100,000 BTU. Maximum Gas Consumption is 120 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1". Inside volume is 12 cubic ft. Setting Space is 8 cubic ft. Inside Dimensions are 27"w x 23"d x 33"h. Uses 2-10" x 20" or 1-20" x 20" shelves per layer. Outside Dimensions are 44"w x 51"d x 65"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 1780 lbs.
Price: $13396.00

 

Details 

Temperature Range is 0-2500F. 16 burners. 984,000 BTU. Maximum Gas Consumption is 1230 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1-1/4". Inside volume is 113 cubic ft. Setting Space is 82 cubic ft. Inside Dimensions are 51"w x 79"d x 51"h. Uses 9-12" x 24" shelves per layer. Outside Dimensions are 67"w x 105"d x 83"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 6000 lbs.
Price: $74488.00

Geil  Microprocessor Programmable Temperature Controller

Details 

Full proportional control, minimum four Ramp/Soak segments and Auto/Manual Control. The PYX controller is the main controller of the system, responsible for the time and temperature of a kiln firing. It reads the temperature by means of a thermocouple mounted on the back wall protruding into the interior of the kiln. The PYX reads the temperature via the thermocouple. It then processes the pre-programmed information (ie: ramp soak segments) and adjusts the output signal to the proportioning valve. Depending on the call for heat form the PYX, the proportioning valve will vary the amount of gas reaching the burners. The output signal is shown as a percent in the OUT1 parameter. By programming the PYX parameters with time and temperature, the kiln can be fired by ramping to a set point in a particular time. This ramp time plus a soak time is one segment. The PYX contains four ramp soak segments making up what is called a firing profile. This profile is stored in the microprocessor's non-volatile memory. The PYX contains two operating modes, AUTO and MANUAL. This pre-programmed profile is operated by the AUTO mode. The kiln can also be fired manually by the PYX controller. Manual firing can be used to perform a reduction.
Price: $3980.00

 
Geil Vent Package - 06
 
Fits DLB-6 and DL-6F front loading kilns.
Price: $1997.00

 
Geil Vent Package - 08
 
Fits DLB-8 and DL-8F front loading kilns.
Price: $1997.00

 
Geil Vent Package - 12
 
Fits DLB-12 and DL-12F front loading kilns.
Price: $2249.00

 
Geil Vent Package - 16
 
Fits DLB-16 and DL-16F front loading kilns.
Price: $2662.00

 
Geil Vent Package - 18
 
Fits DLB-18 and DL-18F front loading kilns.
Price: $2662.00

 
Geil Vent Package - 20
 
Fits DLB-20 and DL-20F front loading kilns.
Price: $2995.00

 
Geil Vent Package - 24
 
Fits DLB-24 and DL-24F front loading kilns.
Price: $3287.00

« | ...30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40... | »