Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Kilns & Firing Accessories


Home » Kilns & Firing Accessories » All Products

 Checkout
Cress Clean Air Vent System

Details 

The CRESS Vent System prevents fumes from escaping from the kiln by creating a small negative pressure within the kiln body. The negative pressure is sufficient to prevent the escape of fumes, but does not cause excessive heat loss or cooling. The vent fan assembly attaches to the bottom of the kiln control panel. Fan ready kilns have pre-installed wiring that plugs into the fan assembly when it is attached. At the same time, the fan also draws air from inside the kiln body into the control panel. The air from inside the kiln body passes into the control panel through small holes in the kiln wall. The small amount of hot kiln air mixes with the room temperature within the control panel prior to being exhausted. For this reason the exhaust air remains relatively cool. CSA and UL Std 499 Certified. Ship wt. is 15 lbs.
Price: $475.00

Cress EC32FH - single phase -  240 volt

Details 

Electrical Requirements: Single Phase, 240 Volts, 74 Amps, 17000 Watts, Copper Wire Size: local code, Breaker Size: local code, NEMA Receptacle Configuration: Wired direct, 13.4 cubic feet of Cone 12 power. Inside Chamber Dimensions: 28"w x 26"d x 32"tall. Uses 2 - 12" x 24" shelves per layer. Ship wt. is 1200 lbs.
Price: $12688.00

Cress EC32FH - single phase - 208 volt

Details 

Electrical Requirements: Single Phase, 208 Volts, 86 Amps, 17000 Watts, Copper Wire Size: local code, Breaker Size: local code, NEMA Receptacle Configuration: Wired direct, 13.4 cubic feet of Cone 12 power. Inside Chamber Dimensions: 28"w x 26"d x 32"tall. Uses 2 - 12" x 24" shelves per layer. Ship wt. is 1200 lbs.
Price: $12688.00

Cress FTX27F - single phase - 240 volt

Details 

Electrical Requirements: Single Phase, 240 Volts, 48 Amps, 11500 Watts, Copper Wire Size: 6, Breaker Size: 60 amp, NEMA Receptacle Configuration: 6-50P, 7 cubic feet of Cone 10 power. Inside Chamber Dimensions: 23.38" Decagon x 27" tall. Uses a 10 sided full shelf (#231 - 21" x 22" x 5/8") or 5 sided half shelf (#231 half - 10.5" x 22" x 5/8"). CSA and UL Std 499 Certified. Ship wt. is 300 lbs.
Price: $2974.00

Cress FTX2818 - single phase - 208 volt

Details 

Electrical Requirements: Single Phase, 208 Volts, 48 Amps, 11500 Watts, Copper Wire Size: 4, Breaker Size: local code, NEMA Receptacle Configuration: 6-50P, 6.6 cubic feet of Cone 10 power. Inside Chamber Dimensions: 28.13" Dodecagon x 18" tall. Uses a 6 sided half shelf (#280 - 13" x 26" x 5/8") or (#280-1 - 13" x 26" x 1"). CSA and UL Std 499 Certified. Ship wt. is 300 lbs.
Price: $2820.00

Cress FTX2818 - single phase - 240 volt

Details 

Electrical Requirements: Single Phase, 240 Volts, 2 circuits - 54 total Amps, 11250 Watts, Copper Wire Size: local code, Breaker Size: local code, NEMA Receptacle Configuration: Wired Direct-2 circuits, 6.6 cubic feet of Cone 10 power. Inside Chamber Dimensions: 28.13" Dodecagon x 18" tall. Uses a 6 sided half shelf (#280 - 13" x 26" x 5/8") or (#280-1 - 13" x 26" x 1"). Ship wt. is 300 lbs.
Price: $2820.00

Cress FTX28UPF - single phase - 208 volt

Details 

Electrical Requirements: Single Phase, 208 Volts, 2 circuits - 17+38 Amps, 11860 Watts, Copper Wire Size: 4, Breaker Size: local code, NEMA Receptacle Configuration: Wired Direct - 2 circuits, 9.6 cubic feet of Cone 8 power. Inside Chamber Dimensions: 28.13" Dodecagon x 27" tall. Uses a 6 sided half shelf (#280 - 13" x 26" x 5/8") or (#280-1 - 13" x 26" x 1"). CSA and UL Std 499 Certified. Ship wt. is 450 lbs.
Price: $3615.00

Cress FTX28UPF - single phase - 240 volt

Details 

Electrical Requirements: Single Phase, 240 Volts, 48 Amps, 9700 Watts, Copper Wire Size: 4, Breaker Size: 60 amp, NEMA Receptacle Configuration: 6-50P, 9.6 cubic feet of Cone 8 power. Inside Chamber Dimensions: 28.13" Dodecagon x 27" tall. Uses a 6 sided half shelf (#280 - 13" x 26" x 5/8") or (#280-1 - 13" x 26" x 1"). CSA and UL Std 499 Certified. Ship wt. is 450 lbs.
Price: $3615.00

Cress FTX31F - single phase - 208 volt

Details 

Electrical Requirements: Single Phase, 208 Volts, 2 circuits - local code Amps, 12900 Watts, Copper Wire Size: 4, Breaker Size: 60 amp, NEMA Receptacle Configuration: Wired Direct - 2 circuits, 8 cubic feet of Cone 8 power. Inside Chamber Dimensions: 23.38" Decagon x 31.5" tall. Uses a 10 sided full shelf (#231 - 21" x 22" x 5/8") or 5 sided half shelf (#231 half - 10.5" x 22" x 5/8"). Ship wt. is 315 lbs.
Price: $3590.00

Cress FTX31F - single phase - 240 volt

Details 

Electrical Requirements: Single Phase, 240 Volts, 48 Amps, 11500 Watts, Copper Wire Size: 4, Breaker Size: 60 amp, NEMA Receptacle Configuration: 6-50P, 8 cubic feet of Cone 8 power. Inside Chamber Dimensions: 23.38" Decagon x 31.5" tall. Uses a 10 sided full shelf (#231 - 21" x 22" x 5/8") or 5 sided half shelf (#231 half - 10.5" x 22" x 5/8"). Ship wt. is 315 lbs.
Price: $3590.00

« | ...20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30... | »