Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Kilns & Firing Accessories


Home » Kilns & Firing Accessories » All Products

 Checkout
 
Geil Vent Package - 40
 
Fits DLB-40 and DL-40F front loading kilns.
Price: $3578.00

 
Geil Vent Package - 50
 
Fits DLB-50 and DL-50F front loading kilns.
Price: $3578.00

 
Geil Vent Package - 60
 
Fits DLB-60 and DL-60F front loading kilns.
Price: $3744.00

Geil Automatic Damper System

Details 

The microprocessor controller is the main controller of the system, responsible for time, temperature and atmosphere of a kiln firing. It reads the temperature by means of a thermocouple mounted on the back wall protruding into the interior of the kiln. The microprocessor then processes the pre-programmed parameters (ramp & soak segments) and adjusts the output signal to the proportioning valve located on the valve train. Depending on the call for heat from the microprocessor, the proportioning valve will vary the amount of gas reaching the burners. The kiln is also equipped with an oxygen probe located just below the thermocouple. Reading the atmosphere of the kiln via the oxygen probe, the microprocessor sends a signal to the damper motor which then adjusts the damper automatically to control the atmosphere. By programming the microprocessor's parameters with time and temperature, the kiln can be fired by ramping to a set point within a particular time frame. This ramp time plus a soak time is one segment. The microprocessor contains four ramp soak segments making up what is called a firing profile. This profile is stored in the microprocessor's non-volatile memory. The microprocessor contains two operating modes, AUTO and MANUAL. These pre-programmed firing profiles can be operated by the AUTO mode. The kiln can also be fired manually by the microprocessor controller. Our auto-damper system is PC controlled using a windows based program that is very easy to operate and hook up. All the parameters from the controller are displayed on your computer screen, making it easier to update and change your firing profiles. The program takes about 5 megabytes of space on your hard disk. There are no major upgrades needed for you to install and connect the microprocessor program. The microprocessor program offers remote station firing capabilities. The microprocessor controller is equipped with a high limit alarm. The high limit alarm will shut the kiln down once the kiln hits the high limit temperature. The damper is automatically closed to prevent any thermal shock. lf there is any disruption of gas or flame failure, the flame safety system will automatically shut the kiln down. Our auto-damper system is backed by a CSA (Canadian Standard Association) certification meeting the required safety standards for gas appliances. A thermocouple is a temperature reading devise made up of two dissimilar metals that when heated produce a thermoelectric current. The speed of the current increases as the temperature increases.
Price: $8059.00

 
Geil Crating Charge for Model 802 Kiln
 
Price: $190.00

 
Geil Crating Charge for Front Loading Kilns
 
Price: $275.00

 
Geil Crating Charge for One Car Shuttle Kilns
 
Price: $475.00

 
Geil Crating Charge for Vent Packages
 
Price: $185.00

 

Details 

Temperature Range is 0-2500F. 20 burners. 1,200,000 BTU. Maximum Gas Consumption is 1090 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1-1/2". Inside volume is 141 cubic ft. Setting Space is 100 cubic ft. Inside Dimensions are 51"w x 102"d x 46"h. Uses 12-12" x 24" shelves per layer. Outside Dimensions are 67"w x 150"d x 74"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 5000 lbs.
Price: $89264.00

 

Details 

Temperature Range is 0-2500F. 6 burners. 200,000 BTU. Maximum Gas Consumption is 136 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 3/4". Inside volume is 17 cubic ft. Setting Space is 12 cubic ft. Inside Dimensions are 31"w x 27"d x 36"h. Uses 2-12" x 24" shelves per layer. Outside Dimensions are 47"w x 53"d x 66"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 1600 lbs.
Price: $19538.00

 

Details 

Temperature Range is 0-2500F. 6 burners. 200,000 BTU. Maximum Gas Consumption is 181 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 3/4". Inside volume is 27 cubic ft. Setting Space is 16 cubic ft. Inside Dimensions are 39"w x 34"d x 36"h. Uses 4-14" x 14" or 2-14" x 28" shelves per layer. Outside Dimensions are 54"w x 63"d x 65"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 2000 lbs.
Price: $23494.00

 

Details 

Temperature Range is 0-2500F. 6 burners. 224,000 BTU. Maximum Gas Consumption is 203 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 3/4". Inside volume is 31 cubic ft. Setting Space is 18 cubic ft. Inside Dimensions are 39"w x 34"d x 40"h. Uses 4-14" x 14" or 2-14" x 28" shelves per layer. Outside Dimensions are 54"w x 63"d x 70"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 2100 lbs.
Price: $23980.00

 

Details 

Temperature Range is 0-2500F. 8 burners. 280,000 BTU. Maximum Gas Consumption is 254 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1". Inside volume is 35 cubic ft. Setting Space is 20 cubic ft. Inside Dimensions are 48"w x 30"d x 40"h. Uses 3-12" x 24" shelves per layer. Outside Dimensions are 63"w x 62"d x 70"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 2200 lbs.
Price: $26197.00

 

Details 

Temperature Range is 0-2500F. 8 burners. 299,000 BTU. Maximum Gas Consumption is 271 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1". Inside volume is 40 cubic ft. Setting Space is 24 cubic ft. Inside Dimensions are 43"w x 38"d x 42"h. Uses 4-16" x 16" shelves per layer. Outside Dimensions are 58"w x 71"d x 72"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 2350 lbs.
Price: $29526.00

 

Details 

Temperature Range is 0-2500F. 8 burners. 349,000 BTU. Maximum Gas Consumption is 317 CFM. Minmum Gas Pressure is 6 inches water column. Gas line inlet is 1". Inside volume is 45 cubic ft. Setting Space is 28 cubic ft. Inside Dimensions are 43"w x 38"d x 48"h. Uses 4-16" x 16" shelves per layer. Outside Dimensions are 58"w x 71"d x 78"h. Electronic flame safety, 100% Shut Off. Push button automatic spark ignition. Manual control valve. 0-15" water column pressure gauge. DD-1 digital, solid state, electronic controller which functions as a high-limit, on/off soaking controller. ETL (InterTek) Certified. Ship wt. is 2550 lbs.
Price: $31086.00

« | ...20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30... | »