Deairing. Click on the image to view specifications. The Power Wedger is the most versatile studio clay processing machine on the market today. It can perform a variety of functions efficiently, transforming clay in any form to a usable product. Some examples: -Mix moist clay from powder and water. -Reclaim scrap - wet or dry (anything that has not been fired). -Blend two or more different bodies. -Add materials (wet or dry) to an already moist body. -Adjust moisture of an already wet body. -OR just warm the clay by mixing it. When the clay is adequately mixed, it can be deaired with vacuum and pugged out in the form of logs ready for use. Ship Wt. is 410 lbs.

Deairing. Click on the image to view specifications. Ship Wt. is 520 lbs.

Non-deairing. Click on the image to view specifications. Ship Wt. is 400 lbs.

Non-deairing. Click on the image to view specifications. Ship Wt. is 600 lbs.

Constructed from high temperature fiber in a laser cut and formed metal frame. The sides fold down to offer unparalleled access to the hot ware. One person can easily fire this kiln, load and unload it without assistance. Insulating firebrick in a welded steel frame form the base of the kiln. Because of the fiber walls and soft brick base, the kiln heats and cools rapidly (eliminates the need to preheat). An entire heating cycle takes approximately 30-45 minutes using a propane tank and burner. The folding sides are made of sheet metal and angle iron. The sides hinge from the base and are lined with 1”inch thick ceramic fiber. Two vent holes on top of the kiln can be covered to allow control of the firing. Large “peep” holes on two sides give easy visibility into the kiln to inspect the cones and for thermocouple placement. The kiln is fired with a 75,000 BTU venturi burner in a fixed cradle. Modular construction allows easy storage or transportation. With the added casters the kiln can be moved in and out storage. The thermocouple safety shut-off system and pilot light provide a safe and reliable gas supply system.

Peter Pugger offers the most versatile tile press available. This low pressure system provides the operator the ability to press a wide range of field tile, relief molding, and architectural pieces as well as pottery. With state-of-the-art controls and valving, the studio press is designed with efficiency and simplicity in mind. In turn, the operator can easily access the hydraulic pressure, as well as the top and bottom air purge for "on-the-fly" adjustments. Quick disconnect air connectors allow quick and easy die frame change-outs. Safe and trouble-free controls allow the operator to produce consistent product quickly and effectively. Crated shipping weight is 2400 lbs.

Can be used with models VPE-8, VPM-7, VPM-9, and VPM-20. Shown with VPE-8. Ship Wt. is 36 lbs.

For use with the VPE-8 and VPE-8SS Extruders. Shown with VPE-8.

Based on the standard VPM-30, the VPM-30TE has incorporated the additional features to transform the Power Wedger into the most versatile tile making machine available. Click on image for additional information. Crated weight is 470 lbs.

Based on the standard VPM-60, the VPM-60TE has incorporated the additional features to transform the Power Wedger into the most versatile tile making machine available. Crated shipping weight is 550 lbs.

3" mouth x 3-5/8" tall. $13.56 per dozen. Net Wt. is .108 lbs. each.

3" mouth x 3-5/8" tall. Net Wt. is 1.3 lbs.

35 lbs. of water per 50 lbs. of plaster. 2,000 psi compressive strength. For product data click here.

44 lbs. of water per 100 lbs. of plaster. 4,500 psi compressive strength. For product data click here. (Shipping this product via UPS includes a $10 split fee)

5,000 psi compressive strength. For product data click here. (Shipping this product via UPS includes a $10 split fee)