Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Skutt Electric Kilns


Home » Kilns & Firing Accessories » Skutt Electric Kilns » All Products

 Checkout
Glaze Tech Kiln -  single phase/240 volt

Details 

This is a true Cone 10 Test Kiln. Unlike most test kilns, the GlazeTech is designed to run on 240V but still only requires a 20Amp breaker. This gives us the power we need to design a truly useful chamber size. It's square design makes it perfect to fire test tiles on multiple levels, and with it's 14" square x 9" depth you can actually test short cylinders to see how your glaze performs on a vertical surface. Ship Wt. is 130 lbs.
Price: $2130.00

Glaze Tech Kiln - single phase/208 volt

Details 

This is a true Cone 10 Test Kiln. Unlike most test kilns, this Glaze Tech Kiln is designed to run on 208V but still only requires a 30Amp breaker. This gives us the power we need to design a truly useful chamber size. It's 14" square design makes it perfect to fire test tiles on multiple levels, and with it's 14" square x 9" depth you can actually test short cylinders to see how your glaze performs on a vertical surface. Ship Wt. is 130 lbs.
Price: $2130.00

Kiln Sitter Firing Gauge

Details 

Used to calibrate the proper positioning of the sensing rod in a LT-3K Kiln Sitter.
Price: $9.00

Kiln Sitter LT-3K Tube Assembly - 70- SHORT

Details 

Kiln Sitter LT-3K Tube Assembly - 70- Short Kiln Sitter Tube Assembly Old Style. Length from outside edge of metal bracket to tip of ceramic tube is 6 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $65.00

Kiln Sitter LT-3K Tube Assembly - 70A-LONG

Details 

Kiln Sitter Tube Assembly for 2.5" brick walls. Length from outside edge of metal bracket to tip of ceramic tube is 7 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $65.00

Kiln Sitter LT-3K Tube Assembly - 70B-XLONG

Details 

Kiln Sitter Tube Assembly for 3" brick walls. Length from outside edge of metal bracket to tip of ceramic tube is 7.5 inches. Instructions, allen wrench, firing gauge, cone supports, 2 mounting screws, and sensing rod included.
Price: $65.00

Skutt     Envirovent 2

Details 

The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System, the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Ship wt. is 17 lbs.
Price: $755.00

Skutt    EnviroLink
Skutt EnviroLink
 
The EnviroLink was developed by engineers at Skutt to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/Hold Program or during preset times of a ConeFire or Glass Fire Mode program. Ship wt. is 2 lbs.
Price: $195.00

 
Skutt Dual Intake Kit
 
The Dual Intake Kit allows you to vent 2 kilns up to 12 cubic feet each, or one kiln between 12 and 24 cubic feet, with one EnviroVent 2 Motor.
Price: $220.00

 
Skutt Extension Kit
 
8' x 3" ducting used to extend original duct.
Price: $40.00

Skutt   Type K Thermocouple - Skutt part #1515

Details 

Element only. Does not include porcelain block or lead wires. Instructions included. 6" in length. Ship wt. is .25 lbs.
Price: $22.00

Skutt  Dual Input Digital Pyrometer - Type K
Skutt Dual Input Digital Pyrometer - Type K
 
This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf. Since it is Dual Input, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy. Ship wt. is 1 lb.
Price: $160.00

 

Details 

This upgrade package allows you to upgrade an existing Skutt kiln. Click on "Details" to find the right upgrade for your kiln.
Price: $110.00

Skutt  Studio Kiln       HotStart Pro with Shelf Kit - single phase / 115 volts

Details 

Electrical Requirements: Single Phase, 115 Volts, 15 Amps, 1725 Watts, Copper Wire Size: 12, Breaker Size: 20, NEMA Receptacle Configuration: 5-15, .6 cubic feet of 1700F power. Inside Chamber Dimensions: 15" wide x 6.5" deep. Includes 13" round shelf, kiln wash, kiln paper, and 3 short posts. Shipping Weight is 100 lbs.
Price: $1655.00

 
Skutt Current Sensor Package - Part #2648
 
A Current Sensor is required for Skutt touchpads that have a red display.
Price: $41.00

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | »