Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Equipment


Home » Equipment » All Products

 Checkout
Debcor Ware Cart #9605
Debcor Ware Cart #9605
 
This truck of 12 gauge steel, welded construction on 4" casters, provides easy mobility of your wares. A variety of uses; excellent for cooling wares after firing or moving from place to place. Can also be used for greenware drying. Furnished with 12 plywood "half shelves" for maximum flexibility each measuring 12" x 28" x 1/2". Overall truck size 24" x 32" x 54" high. Dark Brown.
Price: $885.00

Debcor Ware Cart #9606
Debcor Ware Cart #9606
 
Same features as Ware Cart #9605 (no plywood shelves).
Price: $723.00

Debcor Wedging Board #9615
Debcor Wedging Board #9615
 
480 sq. in. of wedging area! Heavy duty steel 20" x 24" x 2.5". Furnished with fine steel cutting wire, and canvas "snap-on" wedging cloth. Plaster not furnished. Dark Brown. Plaster mix should be around 3.75 gallons of water with 41 lbs. of #1 pottery plaster.
Price: $325.00

Debcor Wedging Stand #9630
Debcor Wedging Stand #9630
 
Heavy duty steel table for wedging or kneading clay before forming. Stand is 19"D x 20"W and adjusts from 30" to 36" in height. 20" x 24" x 2.5" Wedging Board forms the top surface. Plaster not furnished. Furnished with canvas "snap-on" wedging cloth and fine steel cutting wire, with adjustable hook to keep taut. Dark Brown. Plaster mix should be around 3.75 gallons of water with 41 lbs. of #1 pottery plaster.
Price: $715.00

Debcor. Art Cart #AR2-1630
Debcor. Art Cart #AR2-1630
 
Ideal for transporting materials from area to area. 5" heavy-duty hard rubber casters, 2 swivel. 16" x 30" x 32". Grey. 2 trays.
Price: $247.00

Debcor. Art Cart #AR2-2436
Debcor. Art Cart #AR2-2436
 
Ideal for transporting materials from area to area. 5" heavy-duty hard rubber casters, 2 swivel. 24" x 36" x 32". Grey. 2 trays.
Price: $290.00

Debcor. Art Cart #AR3-1630
Debcor. Art Cart #AR3-1630
 
Ideal for transporting materials from area to area. 5" heavy-duty hard rubber casters, 2 swivel. 16" x 30" x 32". Grey. 3 trays. (2 tray is shown)
Price: $307.00

Debcor. Art Cart #AR3-2436
Debcor. Art Cart #AR3-2436
 
Ideal for transporting materials from area to area. 5" heavy-duty hard rubber casters, 2 swivel. 24" x 36" x 32". Grey. 3 trays. (2 tray is shown)
Price: $364.00

 
Debcor. Bonded Foam Bats #9190
 
18" x 36" x 1-1/8" thick (one per shelf). Set of 4. Used in cabinets #9100 & #9150.
Price: $92.00

Gun,  EZE Sprayer
Gun, EZE Sprayer
 
An affordable and easy to use siphon type spray gun.
Price: $28.95

Gun,  SG 212 Spray Gun
Gun, SG 212 Spray Gun
 
Internal mix, pressure feed for heavy materials. Adjustable fluid control. Includes internal and external mix fan nozzles. Bleeder type gun. Operates on air pressures from 20 to 45 PSI. Requires 1/10 H.P. compressor or higher. Basic spray gun for a variety of materials.
Price: $93.00
Out of Stock

Gun, Vapor Spray Gun
Gun, Vapor Spray Gun
 
2.3 mm needle tool and nozzle set up for high viscosity materials. Operating pressure: 15-50 psi, 600 cc Plastic Paint Cup, Air Inlet: 1/4", Air Consumption: 4.5-7.5 cfm.
Price: $65.00
Out of Stock

Jiffy Mixer  ES  (requires 3/8" drill motor)
Jiffy Mixer ES (requires 3/8" drill motor)
 
20.5" x 3.25" with a 3/8" shaft. Mixes 2-5 gallons. Up to 1,000 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $58.75

Jiffy Mixer  HD  (requires 3/4" drill motor)
Jiffy Mixer HD (requires 3/4" drill motor)
 
40" x 9.75" with a 3/4" shaft. Mixes 75-100 gallons. Up to 250 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $349.95

Jiffy Mixer  HS-1
Jiffy Mixer HS-1
 
10" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.
Price: $24.50

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »