GR Pottery Forms

The RD2 Round 11" Form is the perfect size for dinner plates. WA2 Compatible Works with any of our Rim Templates 11.5" or greater Stackable with OG Round 12.5" Form Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Round 12.5" Form is our largest RD2 Round, and is a great size for large dinner plates, or serving trays. WA2 Compatible Stackable with OG Round 14" Form Works with any of our Rim Templates sized 12.5" or greater Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Round 6.5" Form is our smallest RD2 Round, and is a great size for tapas plates, or bread plates. WA2 Compatible Stackable with OG Round 8" Form Works with any of our Rim Templates 7.5" or greater Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Round 8" Form is a great size for dessert plates or trinket dishes. WA2 Compatible Stackable with OG Round 9.5" Form Works with any of our Rim Templates 8.5" or greater Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Round 9.5" Form is perfect for salad plates. WA2 Compatible Stackable with OG Round 11" Form Works with any of our Rim Templates 9.5" or greater Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Square 11" Form is perfect for making large platters and serving trays. Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Square 7" Form is perfect for making salad plates or trinket dishes. Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

The RD2 Square 9" Form is a great size for making dinner plates and serving trays. Clay should be left on the RD2 forms until stiff, leather-hard. Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth. All Forms are measured in inches.

These 1/2" Spacers are perfect for placing under your Form while the clay dries to a stiff, leather-hard, and helps keep the rims from warping.

These 1/4" Spacers are perfect for placing under your Form while the clay dries to a stiff, leather-hard, and helps keep the rims from warping.

The Studio Board 12x10" is the perfect ware board for any potter. Studio boards are to be used as a work surface and to assist when flipping work. They are not designed to be used for drying or wedging clay on. Because the boards are thin and made of wood, they cannot be left wet for too long or they could get soft or warp. Best practice for caring for the Studio Boards is to ensure they dry fully between uses, and that the clay is not overly moist. Studio Boards are measured in inches, and are 1/4" thick. Weight: 1.0 lbs

The Studio Board 20x16" is the perfect ware board for any potter, especially if you are working on larger pieces. Studio boards are to be used as a work surface and to assist when flipping work. They are not designed to be used for drying or wedging clay on. Because the boards are thin and made of wood, they cannot be left wet for too long or they could get soft or warp. Best practice for caring for the Studio Boards is to ensure they dry fully between uses, and that the clay is not overly moist. Studio Boards are measured in inches, and are 1/4" thick. Weight: 2.5 lbs

This compass turned into a measuring device, the Sue Tool is used to score a line to develop a consistent lip outside of the body of the form. *Colors available: Blue, Green, Orange or Red.

The WA Board is a key component of our WA2 Wheel Attachment System. The WA Board is a Bat that is used to prep and manage slabs to use with the WA2. The groove in the bottom helps to locate Bat pins for an easy attachment. The smooth surface allows the maker to compress the slab or add texture with the help of the potters wheel. It is also helpful to manage large plates as they are drying. The WA Board is 15" in diameter, and is designed for wheel heads with 10" spacing between Bat pins. WA Board is measured in inches. Weight: 2.9 lbs

The second generation of our Wheel Attachment System, the WA2 System is perfect for use in conjunction with all of the RD2 Round Forms with a 2-pin Key system, and is still compatible with the OG Rounds, OG Slim Rounds, and Rim Templates by simply removing the outside pin. The WA2 System Includes: (1) WA2 (1) WA Board (1) WA2 Key - Includes 2 Pins Fits most U.S. standard wheel heads with 10" bat pins. Measures 15" in diameter.