Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout



Enter password:


Home » All Products

Brent Kiln Shelf Cart


A mobile, efficient means of loading and unloading your kiln, the Brent Kiln Shelf Cart is 47" high, 35" long and 13" wide. Steel rods keep up to 16 shelves (up to 20") stored vertically and separated for less damage. Three shelves give you room for stacking posts, cones, stilts, pots, etc. and are interchangeable with our ware cart shelves.
Price: $703.00

Brent Machined Wheel Head 14" x 1"
14" aluminum wheel head for the kick wheel shaft.
Price: $152.00

Brent Machined Wheel Head with bearing - 12" x 3/4"
12" aluminum wheel head for electric wheels.
Price: $232.20

Brent Machined Wheel Head with bearing - 14" x 3/4"
14" aluminum wheel head for electric wheels.
Price: $261.90

Brent Mobile Clay Cart


Sturdily constructed of birch plywood, this clay cart will provide years of service. The inside is completely lined, and the top is fitted with piano hinge and recessed pull allowing the cart to remain open while class is in session. Includes casters for easy moving that also lock in place. Finish consists of sealer and multiple coats of lacquer. Overall size: 28"H X 18" W X 14" D.
Price: $475.00

Brent Mobile Clay Cart with Wedging Board


The AMACO Clay Cart with wedging board is a dual purpose mobile unit. This compact, space saving cart combines a sturdy, practical wedging board and a cabinet that has a capacity of approximately 300 pounds of moist clay. The wedging board serves as a lid to the cart and is hinged at the back. It has two 10" x 12" absorbant plaster surfaces and a canvas wedging cloth that can snap firmly over the left plaster surface if desired. The fine steel cutting wire is held taut by a turnbuckle. The cabinet and wedging board are constructed of cabinet grade birch plywood and finished with exterior polyurethane. The cart rolls easily on casters and the front casters lock to hold the cart stationary when in use. Overall measurements of the cart and wedging board are 44" high, 22" wide and 14 3/4" deep.
Price: $749.00

Brent Mobile Heat Proof Kiln Cart


Mobility and safety are the prime features of this kiln cart. This sturdy, rugged cart is made of 16 gauge steel with 19 gauge trays. Each of the three extra deep trays includes a non-asbestos heat resistant bottom surface panel to make handling of projects safe and easy right from the kiln. The cart comes with quality 5" wheels for ease of movement.
Price: $729.00

Brent Motor, 1 HP, 110v
For model CXC.
Price: $464.30

Brent Motor, 1/2 HP, 110v
For models B and 16 built after 2006, and model C built prior to 2006.
Price: $428.30

Brent Motor, 1/3 HP, 110v
For models A, B, and 16 built prior to 2006.
Price: $506.70

Brent Motor, 3/4 HP, 110v
For model C built after 2006.
Price: $488.70

Brent Plastibat -  8"
Brent Plastibat - 8"
Plasti-Bat was designed by studio potters to be a versatile, long-lasting, high-quality bat that is virtually indestructible! Made of 1/4" to 3/8" thick, very rigid, high impact plastic, they will provide continuous use, will not splinter, delaminate, swell, or shrink. They are easy to clean and are impervious to water and most chemicals. Net Wt. is .465 lbs.
Price: $11.10

Brent Plastibat - 10"
Brent Plastibat - 10"
Net Wt. is .787 lbs.
Price: $13.45

Brent Plastibat - 12"
Brent Plastibat - 12"
Net Wt. is 1.19 lbs.
Price: $17.50

Brent Plastibat - 14"
Brent Plastibat - 14"
Net Wt. is 1.56 lbs.
Price: $22.25

« | ...40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50... | »