good straight lines and curved ends- for tall vessels, sculpting, or plate making 9 inches long Comfortable, beautiful and practical, made of cherry heartwood by a small team in St Louis, USA.

I5 features a well-rounded curve and a super-sharp point that make it great for shaping, smoothing, and trimming. The size is perfect for fitting into smaller vessels and the straight edges help shape the sides of your bowls, mugs, and more. size: 5"" long x 2.5"" wide material: cherry wood Comfortable, beautiful, and practical. Handmade by a creative team in St. Louis, MO.

2300F fireclay insulating soft brick. 9" x 4.5" x 2.5". Fired Analysis: SiO2-55%, Al2O3-42%, Fe2O3-.7%, KNa-1.1%. Density is 36 lbs./cubic foot. Modulus of rupture is 145 lbs./sq. inch. Thermal Conductivity at 2400F is .26. Net Wt. is 2.38 lbs.

2600F fireclay insulating soft brick. 9" x 4.5" x 2.5". Fired Analysis: SiO2-41%, Al2O3-56%, Fe2O3-.7%, KNa-1.7%. Density is 50 lbs./cubic foot. Modulus of rupture is 220 lbs./sq. inch. Thermal Conductivity at 2400F is .36. Net Wt. is 2.9 lbs.

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout.

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout. CI Pigment Black 11 (Group II - Synthetic Black Iron Oxide) 99%. Click on the product name for more information.

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout. CI Pigment Red 101 (iron oxide) 85-95%, Crystaline Silica 1-5%, Calcium Oxide <1%. Click on the product name for more information.

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout. CI Pigment Red 101 (iron oxide) >80%, Crystaline Silica <9%, Calcium Oxide <1%, Alumina Oxide 1-5%, Magnesium Oxide 1-5%. Click on the product name for more information.

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout. CI Pigment Yellow 42 (yellow iron oxide) 98%. Click on the product name for more information.

1/2 oz. squeeze bottle with .7mm tip. Net Wt. is .012 lbs.

20.5" x 3.25" with a 3/8" shaft. Mixes 2-5 gallons. Up to 1,000 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

40" x 9.75" with a 3/4" shaft. Mixes 75-100 gallons. Up to 250 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

10" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

14.75" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

30" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.