Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout



Enter password:


Kilns & Firing Accessories

Home » Kilns & Firing Accessories » All Products

Geil Vent Package - 28
Fits DLB-28 and DL-28F front loading kilns.
Price: $3287.00

Geil Vent Package - 30
Fits DLB-30 and DL-30F front loading kilns.
Price: $3287.00

Geil  Vent Package - 36
Geil Vent Package - 36
Fits DLB-36 and DL-36F front loading kilns. Venting Packages are custom designed to fit each specific kiln model. Packages include Draft hood with mounting brackets, Collar, Vent Pipe, Roof Jack, Storm Collar, and Cap. All kits are gravity type venting. Standard material is galvanized sheet steel. Stainless steel quoted upon request. Fire buckets optional at extra cost. Vent Pipe length and structural variations are accounted for through a Venting Checklist.
Price: $3578.00

Geil Vent Package - 40
Fits DLB-40 and DL-40F front loading kilns.
Price: $3578.00

Geil Vent Package - 50
Fits DLB-50 and DL-50F front loading kilns.
Price: $3578.00

Geil Vent Package - 60
Fits DLB-60 and DL-60F front loading kilns.
Price: $3744.00

Geil Automatic Damper System


The microprocessor controller is the main controller of the system, responsible for time, temperature and atmosphere of a kiln firing. It reads the temperature by means of a thermocouple mounted on the back wall protruding into the interior of the kiln. The microprocessor then processes the pre-programmed parameters (ramp & soak segments) and adjusts the output signal to the proportioning valve located on the valve train. Depending on the call for heat from the microprocessor, the proportioning valve will vary the amount of gas reaching the burners. The kiln is also equipped with an oxygen probe located just below the thermocouple. Reading the atmosphere of the kiln via the oxygen probe, the microprocessor sends a signal to the damper motor which then adjusts the damper automatically to control the atmosphere. By programming the microprocessor's parameters with time and temperature, the kiln can be fired by ramping to a set point within a particular time frame. This ramp time plus a soak time is one segment. The microprocessor contains four ramp soak segments making up what is called a firing profile. This profile is stored in the microprocessor's non-volatile memory. The microprocessor contains two operating modes, AUTO and MANUAL. These pre-programmed firing profiles can be operated by the AUTO mode. The kiln can also be fired manually by the microprocessor controller. Our auto-damper system is PC controlled using a windows based program that is very easy to operate and hook up. All the parameters from the controller are displayed on your computer screen, making it easier to update and change your firing profiles. The program takes about 5 megabytes of space on your hard disk. There are no major upgrades needed for you to install and connect the microprocessor program. The microprocessor program offers remote station firing capabilities. The microprocessor controller is equipped with a high limit alarm. The high limit alarm will shut the kiln down once the kiln hits the high limit temperature. The damper is automatically closed to prevent any thermal shock. lf there is any disruption of gas or flame failure, the flame safety system will automatically shut the kiln down. Our auto-damper system is backed by a CSA (Canadian Standard Association) certification meeting the required safety standards for gas appliances. A thermocouple is a temperature reading devise made up of two dissimilar metals that when heated produce a thermoelectric current. The speed of the current increases as the temperature increases.
Price: $8059.00

Geil Crating Charge for Model 802 Kiln
Price: $190.00

Geil Crating Charge for Front Loading Kilns
Price: $275.00

Geil Crating Charge for One Car Shuttle Kilns
Price: $475.00

« | ...30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40... | »