Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Firing Accessories


Home » Kilns & Firing Accessories » Firing Accessories » All Products

 Checkout
PBI Gloves - HP123 - 1 pair
PBI Gloves - HP123 - 1 pair
 
45 oz. PBI insulation, wool lined, 23" long, thermal protective gloves. Service temperature is 1800 degrees. Excellent abrasion resistance. Ship Wt. is 2.25 lb.
Price: $195.00

Plate Rack - Set of 3
Plate Rack - Set of 3
 
Unique Plate rack enables the potter to fire 1-6 plates in a stacking arrangement. The stilts are composed of high temperature clay that can be fired to 2400F. They withstand repeated firings and rugged treatment. The points are made of the finest metal alloys. Net Wt. of set is .82 lbs.
Price: $12.30

Pyrometric Cones  -  Small - 1 box

Details 

50 cones per box. Used in Kiln Sitters. Volume price breaks per box are: 5 boxes-$12.05, 10 boxes-$11.25, 20 boxes-$10.50, 50 boxes-$9.75 each. Ship wt. is .2 lbs.
 
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
Price: $12.80

Pyrometric Cones - Large - 1 box

Details 

50 cones per box. Large Cones are mounted in moist clay or Cone Plaques. Correct mounting height and angle are critical for the accurate bending of these cones. Volume price breaks per box are: 5 boxes-$16.35, 10 boxes-$15.30, 20 boxes-$14.25, 50 boxes-$13.25 each. Ship wt. is .70 lbs.
 
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
   
Price: $17.40

Pyrometric Cones - Self Supporting - 1 box

Details 

25 cones per box. Self-Supporting Witness Cones are ready for use without mounting. Correct height and angle are built into the cone base. Volume price breaks per box are: 5 boxes-$12.05, 10 boxes-$11.25, 20 boxes-$10.50, 50 boxes-$9.75 each. Ship wt. is .75 lbs.
 
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
Price: $12.80

Rubbing Brick - Silicon Carbide
Rubbing Brick - Silicon Carbide
 
Rounded Handle. 1" x 3" x 6". Ship Wt. 1.5 lbs.
Price: $52.50

Rubbing Stick - 3/8" x 3/8" x 3.5" long
Rubbing Stick - 3/8" x 3/8" x 3.5" long
 
Alumina Oxide, 80 grit bar. Ship Wt. is .2 lbs.
Price: $7.80

Rubbing Stone - Bar of 3 large stones
Rubbing Stone - Bar of 3 large stones
 
3 large bars at 1" x 2" x 2.5" long. Alumina Oxide, 80 grit bar. Ship Wt. is 1.5 lbs.
Price: $33.00

Rubbing Stone - large - 1" x 2" x 2.5" long
Rubbing Stone - large - 1" x 2" x 2.5" long
 
Alumina Oxide, 80 grit bar. Ship Wt. is .5 lbs.
Price: $8.55

Rubbing Stone - medium  - 1" x 1" x 2" long
Rubbing Stone - medium - 1" x 1" x 2" long
 
Alumina Oxide, 80 grit bar. Ship Wt. is .2 lbs.
Price: $8.85

Sairbond Mortar - 1 lb.
Sairbond Mortar - 1 lb.
 
Powdered, heat setting, cone 10 mortar and patching compound. Not suitable for areas where there is not enough heat to bond the mortar. Primarily used for floors, arches, and walls. Flows nicely and cleans up with water. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Volume price breaks are: 5 lbs.-$10.50, 10 lbs.-$17.50, 50 lbs.-$77.50, and 100 lbs.-$130.00, and are available at check out. Ship Wt. is 1 lb.
Price: $2.85
Out of Stock

Sairset Mortar  - 1 pint
Sairset Mortar - 1 pint
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 2.8 lbs.
Price: $3.35

Sairset Mortar - 1 gallon
Sairset Mortar - 1 gallon
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 19 lbs.
Price: $13.95

 
Sairset Mortar - 50 lbs.
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 52 lbs.
Price: $29.50

Skutt     Envirovent 2

Details 

The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System, the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Ship wt. is 17 lbs.
Price: $755.00

« | ...10 | 11 | 12 | 13 | 14 | 15 | 16 | »