Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Firing Accessories


Home » Kilns & Firing Accessories » Firing Accessories » All Products

 Checkout
Sairbond Mortar - 1 lb.
Sairbond Mortar - 1 lb.
 
Powdered, heat setting, cone 10 mortar and patching compound. Not suitable for areas where there is not enough heat to bond the mortar. Primarily used for floors, arches, and walls. Flows nicely and cleans up with water. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Volume price breaks are: 5 lbs.-$10.50, 10 lbs.-$17.50, 50 lbs.-$77.50, and 100 lbs.-$130.00, and are available at check out. Ship Wt. is 1 lb.
Price: $2.85

Sairset Mortar  - 1 pint
Sairset Mortar - 1 pint
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 2.8 lbs.
Price: $3.35

Sairset Mortar - 1 gallon
Sairset Mortar - 1 gallon
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 19 lbs.
Price: $13.95

 
Sairset Mortar - 50 lbs.
 
Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 52 lbs.
Price: $29.50

Single Plate Holder
Single Plate Holder
 
Designed for decal or luster firings. Load work upright and save space. Maximum plate diameter is 12". The point to point distance is a 1.25". This stilt is composed of high temperature clay that can be fired to 2400F. They withstand repeated firings and rugged treatment. The points are made of the finest metal alloys. Net Wt. is .25 lbs.
Price: $4.25

Skutt     Envirovent 2

Details 

The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System, the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Ship wt. is 17 lbs.
Price: $580.00

Skutt    EnviroLink
Skutt EnviroLink
 
The EnviroLink was developed by engineers at Skutt to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/Hold Program or during preset times of a ConeFire or Glass Fire Mode program. Ship wt. is 2 lbs.
Price: $150.00

 
Skutt Dual Intake Kit
 
The Dual Intake Kit allows you to vent 2 kilns up to 12 cubic feet each, or one kiln between 12 and 24 cubic feet, with one EnviroVent 2 Motor.
Price: $185.00

 
Skutt Extension Kit
 
8' x 3" ducting used to extend original duct.
Price: $32.00

Skutt   Type K Thermocouple - Skutt part #1515

Details 

Element only. Does not include porcelain block or lead wires. Instructions included. 6" in length. Ship wt. is .25 lbs.
Price: $16.00

Skutt  Analog Pyrometer - Type K
Skutt Analog Pyrometer - Type K
 
If you are ordering a KilnSitter kiln you may want to equip it with a Skutt Analog Pyrometer. A pyrometer will let you know what the temperature of the kiln chamber is throughout the entire firing. This is especially helpful to know when you are firing glass, heat treating metal or troubleshooting your kiln. The pyrometer comes complete with a MI Cable Type K thermocouple and all the mounting hardware needed. 0-2500F type K thermocouple with wall mounted meter. Ship wt. is 2 lbs.
Price: $190.00

Skutt  Dual Input Digital Pyrometer - Type K
Skutt Dual Input Digital Pyrometer - Type K
 
This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln. The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf. Since it is Dual Input, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy. Ship wt. is 1 lb.
Price: $135.00

Skutt Peep Hole Plug
Skutt Peep Hole Plug
 
Cast high fire porcelain. Ship wt. is .2 lbs.
Price: $5.00

Stacking Tile Holder
Stacking Tile Holder
 
Light weight design and economical solution to firing any size tile. Point to point is 2". This stilt is composed of high temperature clay that can be fired to 2400F. They withstand repeated firings and rugged treatment. Set of 4 tile holders is $8.60 and can be purchased at checkout. Net Wt. is .09 lbs.
Price: $2.25

Stilt Set - Large

Details 

Contains 6 each of: A-0, A-1, A-2, A-4, A-6, D3B, D4B and 3 each of: A-8, A-10 and 2 each of: B2x9, B4x6, B6x12, F6H and 1 each of: B10x15, C12x15, C14x9, and E2s. Net Wt. is 3.08 lbs.
Price: $105.00

« | ...10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | »