Comodo Trusted Site Seal

Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout



Enter password:


Product detail

Home » Glazes » Cone 06 Glazes, Underglazes, & Decorating Colors » Duncan Cone 06 Glazes & Underglazes » Duncan Accessories

Duncan SP-401 - Quick-Crackle - 2 fluid oz.
Duncan  SP-401 - Quick-Crackle - 2 fluid oz.
1. Base coat piece with OS Opaque Acrylics, Ultra Metallics or Liquid Pearls. 2. When base coat is dry, apply a smooth, even coat of Quik-Crackle. Clean brush immediately with water and Duncan Brush Cleaner, making sure no Quik-Crackle is left in the metal ferrule. Let Quik-Crackle dry for 20 mintues to one hour. Quik-Crackle can set overnight and the same exciting results will be achieved. 3. Working quickly, use a clean, soft brush to apply an even coat of a contrasting top-coat color over the dry Quik-Crackle. Choose top-coat color for best results from the Bisq-Stain Opaques line. Once the top-coat color has been applied, do not reapply more color after cracking starts. Cracking time may vary from color to color. Wait a few minutes for cracking to start. TIPS: 1. Cracking follows the direction in which the top-coat color was applied, that is, if color was swirled on, the cracks swirl. Straight strokes will give your project straight cracks. 2. Achieve large, bold cracks by applying a heaver top-coat color. 3. Achieve fine cracks by applying a thin top-coat color. 4. Achieve a fine, web cracking by sponging on top-coat color. 5. Flat Opaque brushes give the best results when applying Quik-Crackle. 6. Take your time with the project; be sure all phases are properly set or dry before proceeding to the next step. 7. When cracking has completed and the top-coat is completely dry, you can add brushstrokes or design work. 8. Seal the project with a spray or brush-on sealer.
Ask A Question
Price: $2.55

« Previous | Next »