|
|
|
|
|
|
 |
|
KILN VENTILATION PRODUCTS
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
 |
|
|
THE ENVIROVENT 2 IS A DOWNDRAFT VENTILATION SYSTEM DESIGNED TO EXTRACT FUMES FROM YOUR ELECTRIC KILN AND VENT THEM OUTDOORS BEFORE THEY HAVE A CHANCE TO ENTER THE ROOM. BECAUSE IT IS A DOWNDRAFT SYSTEM IT ALSO IMPROVES THE FIRING ATMOSPHERE IN THE KILN WHILE IT IS PROTECTING YOU FROM THE FUMES THAT CAN BE EMITTED FROM CERTAIN CLAY BODIES AND GLAZES WHEN THEY ARE FIRED.
|
|
BENEFITS OF THE ENVIROVENT 2
|
BETTER HEAT UNIFORMITY
|
|
BETTER KILN ATMOSPHERE
|
|
BETTER WORKING ENVIRONMENT
|
|
CERTIFIED SAFE - UL APPROVED
|
|
VENT 2 KILNS WITH 1 MOTOR
|
|
WALL MOUNTED MOTOR
|
|
PLENUM CUP RETAINS SEAL THROUGHOUT FIRING
|
|
NEGATIVE PRESSURE SYSTEM
|
|
ABILITY TO CONTROL THE VENT WITH A KM OR GM MODEL SKUTT KILN
|
|
WORKS ON MANY DIFFERENT BRANDS OF ELECTRIC KILNS
|
|
|
|
|
STANDARD SYSTEM
|
$430.00
|
|
DUAL INTAKE KIT (FOR 2 SM KILNS OR 1 KILN THAT'S 12-24 CUBIC FEET)
|
$130.00
|
|
EXTENSION KIT (8' X 3" DUCTING USED TO EXTEND ORIGINAL DUCT.
|
$30.00
|
|
|
HERE'S HOW IT WORKS
|
A DESIGNATED NUMBER OF HOLES ARE DRILLED IN THE LID AND FLOOR OF THE KILN EITHER IN THE FACTORY OR ON LOCATION. A SPRING LOADED PLENUM CUP IS PLACED UNDER THE KILN AND TENSIONED BETWEEN THE FLOOR OF THE KILN AND THE FLOOR. THE HOLES IN THE FLOOR OF THE KILN ARE PLACED IN A TIGHT PATTERN SO THE PLENUM CUP CAN COVER THEM ALL. THE OTHER END OF THE CUP IS CONNECTED BY 3" DUCTING TO A FAN WHICH IS GENERALLY MOUNTED ON THE WALL. ON THE OPPOSITE END OF THE FAN THE AIR IS DUCTED THROUGH THE WALL TO THE OUTSIDE AIR. THE PLENUM CUP HAS 3 ADDITIONAL HOLES FROM WHICH IT DRAWS ROOM TEMPERATURE AIR TO MIX WITH THE HEATED AIR FROM THE KILN. THIS SERVES TWO PURPOSES. SINCE THE KILN AIR IS MIXED WITH COOLER ROOM AIR, THE AIR COMING OUT OF THE END OF THE VENT IS NEVER HOTTER THAN THE AVERAGE HAIR DRYER. SECONDLY, THE HOLES IN THE PLENUM CUP ARE SIZED TO REDUCE THE VACUUM ON THE KILN CHAMBER SO ONLY A SMALL AMOUNT OF AIR IS MOVING THROUGH THE KILN. THIS ENSURES THE FIRING TIME IS NOT AFFECTED AND THE WARE IS NOT AT RISK.
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
CRESS CLEAN AIR SYSTEM
$325.00
|
|
|
 |
|
|
THE CRESS CLEAN AIR SYSTEM IS BUILT ONLY FOR CRESS KILN MODELS ..FX SERIES OR E SERIES.
THE CRESS CLEAN AIR EXHAUST SYSTEM IS A NEW PATENTED MULTIPORT VENTING SYSTEM THAT IS BUILT INTO THE CONTROL PANEL. UNLIKE OTHER SYSTEMS THAT ARE BULKY AND CUMBERSOME, THIS SYSTEM IS VIRTUALLY INVISIBLE. THE CLEAN AIR SYSTEM IMPROVES FIRING CONDITIONS BECAUSE FRESH AIR IS DRAWN INTO THE KILN THROUGH THE SELF VENTING LID AND GASES AND FUMES ARE VENTED OUT MULTIPLE PORTS POSITIONED THROUGHOUT THE KILN. IT REMOVES UNPLEASANT FUMES FROM THE ROOM WHILE DRAWING OXYGEN INTO THE KILN PRODUCING MORE VIVID, BRIGHTER COLORS, AND MAINTAINS A MORE EVEN TEMPERATURE THROUGHOUT. THE CLEAN AIR VENT ATTACHES EASILY TO ANY FX, OR E-SERIES KILN AND MAY BE ADDED TO AN EXISTING KILN AT ANY TIME. ON THE E-SERIES KILNS, THE VENT IS OPERATED AUTOMATICALLY BY THE COMPUTER AND STARTS WHEN THE KILN STARTS. WHEN THE KILN REACHES YOUR TARGET TEMPERATURE AND AUTOMATICALLY SHUTS OFF, THE VENT ALSO SHUTS OFF AND REMAINS OFF UNTIL THE KILN COOLS TO 1000 DEGREES. AT THAT TIME THE VENT WILL AUTOMATICALLY START UP AGAIN AND FAST COOL THE KILN TO 140 DEGREES AND THEN SHUT DOWN.
|
|
|
|
|
Online Catalog *Please note- Prices change without notice, tax and shipping charges are not included. Call, or fax us for an official quote. Phone (714) 541-4157 Fax (714) 541-2021
|
|
|
|
FILL OUT OUR NEW SECURE ONLINE ORDER FORM
CLICK HERE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
